This is the lid / top piece of the printer and is always recommended if you are going to want your printer enclosed to print ABS. If you are only going to print PLA and don't need your printer enclosed this is not required.

<p>This is the lid / top piece of the printer and is always recommended if you are going to want your printer enclosed to print ABS.</p><p>If you are only going to print PLA and don&apos;t need your printer enclosed this is not required.</p>

What is Top Hat Enclosure

As the 0.1 is quite a bit smaller and to save costs, most 0.1 Kits do not include a screen. You can run the printer from the Klipper web interface instead.

<h1 id="does-the-01-come-with-a-screen">Does the 0.1 come with a screen?</h1><p>As the 0.1 is quite a bit smaller and to save costs, most 0.1 Kits do not include a screen. You can run the printer from the Klipper web interface instead.</p>

Voron 0.1 F.A.Q.

Please see our blog post here - https://www.phaserfpv.com.au/blogs/3d-printing-news/which-voron-0-1-kit-is-best-for-you

<p>Please see our blog post here -&#xA0;<a href="https://www.phaserfpv.com.au/blogs/3d-printing-news/which-voron-0-1-kit-is-best-for-you" id="isPasted">https://www.phaserfpv.com.au/blogs/3d-printing-news/which-voron-0-1-kit-is-best-for-you</a></p>

Fysetc vs LDO Voron 0.1 Kit Differences

Voron Phaser Support

Voron 0.1

Voron 2.4 Rail Twist as shown in Bed Mesh

Voron 2.4